KAVAN Epoxy Metal 5min 25g dispenser
68,75 SEK
- Säkra kortbetalningar
- Fri frakt på ordrar över 2500kr
Beskrivning
Art.nr: KAV56.9968.EN
Premium 5min clear two-part epoxy adhesive with metal filler. Packaging: double dispenser (syringe) 25 ml (hardener + resin).
Two-component epoxy adhesive with metal filler for reliable bonding and sealing of various metals and other materials; sealing of improperly drilled holes, damaged edges, cracks, etc. Easily sandable and re-paintable. Resists temperatures up to +120 °C.
Properties
Mixing ratio: 1:1 (by volume and weight)
Viscosity (after mixing): 2000025000 mPa.s
Working time (to gelation): ca. 46 min (20 °C to 25 °C)
Glued parts can be handled: after 1012 min
Half strength: after 1012 min
Full strength: after 23 h
Full cure: 1624 h
Density: 1.3 g/cm³
Shear strength: 1418 N/mm²
Temperature resistance of bonded joint: -40 °C to +120 °C
Removing of excess uncured adhesive: cloth or paper towel moistened with denatured alcohol.
For use as an adhesive sealant: optimum gap width between glued parts 0.1-0.2 mm.
Suitable for bonding: metals, wood, plywood, ceramics, porcelain, glass and carbon laminates.
Not suitable for bonding: soft and flexible plastics (incl. EPP and EPO), polyethylene, Teflon.
Storing: in a tightly closed container, in a cool, dry and dark place (at a temperature of 10 °C to 25 °C). Do not expose to temperatures below 10 °C. Take care not to confuse the resin and hardener caps - even a small amount of hardener can degrade large quantities of resin.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year while maintaining the above product properties
The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008. See the "Downloads" section for details.
Two-component epoxy adhesive with metal filler for reliable bonding and sealing of various metals and other materials; sealing of improperly drilled holes, damaged edges, cracks, etc. Easily sandable and re-paintable. Resists temperatures up to +120 °C.
Properties
Mixing ratio: 1:1 (by volume and weight)
Viscosity (after mixing): 2000025000 mPa.s
Working time (to gelation): ca. 46 min (20 °C to 25 °C)
Glued parts can be handled: after 1012 min
Half strength: after 1012 min
Full strength: after 23 h
Full cure: 1624 h
Density: 1.3 g/cm³
Shear strength: 1418 N/mm²
Temperature resistance of bonded joint: -40 °C to +120 °C
Removing of excess uncured adhesive: cloth or paper towel moistened with denatured alcohol.
For use as an adhesive sealant: optimum gap width between glued parts 0.1-0.2 mm.
Suitable for bonding: metals, wood, plywood, ceramics, porcelain, glass and carbon laminates.
Not suitable for bonding: soft and flexible plastics (incl. EPP and EPO), polyethylene, Teflon.
Storing: in a tightly closed container, in a cool, dry and dark place (at a temperature of 10 °C to 25 °C). Do not expose to temperatures below 10 °C. Take care not to confuse the resin and hardener caps - even a small amount of hardener can degrade large quantities of resin.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year while maintaining the above product properties
The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008. See the "Downloads" section for details.