Holybro Kakute F722 Stacks w/ Tekko32 F4 Metal 4in1 65A ESC
2 289 SEK
- Säkra kortbetalningar
- Fri frakt på ordrar över 2500kr
Beskrivning
Art.nr: 20225
Flight Controller
Kakute F722
Overview:
High-performance STM32 F722 MCU with speeds up to 216MHz.
ICM42688P gyroscope, independent low-noise power supply.
Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.
Built-in analog video OSD, 16 Mbytes black box,
High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.
Specification:
MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash
IMU: ICM42688-P (SPI)
Barometer: BMP280 (legacy) or SPA06
OSD: AT7456E
5x hardware UARTS (UART1,2,3,4,6)
7x PWM Outputs (6 Motor Output, 1 LED)
Onboard 16 Mbytes for Blackbox logging
Battery input voltage: 3S - 8S
BEC: 9V/3A, 5V/2A, 3.3V/0.2A
Connector
o 2x JST-SH 8pin port for ESC
o 1x JST-SH 6pin port for HD VTX
o 2x JST-SH 4pin port for Receiver & Analog Camera
o 1x JST-SH 3pin port for LED
USB Type -C
Dimensions: 35x35mm
Mounting Holes: Standard 30.5 x 30.5 mm
Weight: 8g
Firmware Targets
Betaflight Target: KAKUTEF7MINIV3
INAV Target: KAKUTEF7MINIV3
ESC
Tekko32 F4 4in1 50A ESC(AM32)
Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / AM32 / 30x30
Features:
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Tekko32 F4 4in1 60A ESC(AM32)
Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30
Features:
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Tekko32 F4 Metal 4in1 65A ESC(AM32)
F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / AM32
Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.
Features:
New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Metal-cased MOSFET for excellent heat dissipation
Massive on-board capacitance for noise filtering at 2068uf
3 oz copper PCB design to allow bigger current and better heat dissipation
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
SKU20263, 20264,20265 Package Includes:
1x Kakute F722
1x Tekko32 F4 4in1 50A ESC/Tekko32 F4 4in1 60A ESC/Tekko32 F4 Metal 4in1 65A ESC
1x Electrolytic capacito: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
1x JST SH 6pin 100mm cable(for Caddx HD Systems)
Kakute F722
Overview:
High-performance STM32 F722 MCU with speeds up to 216MHz.
ICM42688P gyroscope, independent low-noise power supply.
Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.
Built-in analog video OSD, 16 Mbytes black box,
High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.
Specification:
MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash
IMU: ICM42688-P (SPI)
Barometer: BMP280 (legacy) or SPA06
OSD: AT7456E
5x hardware UARTS (UART1,2,3,4,6)
7x PWM Outputs (6 Motor Output, 1 LED)
Onboard 16 Mbytes for Blackbox logging
Battery input voltage: 3S - 8S
BEC: 9V/3A, 5V/2A, 3.3V/0.2A
Connector
o 2x JST-SH 8pin port for ESC
o 1x JST-SH 6pin port for HD VTX
o 2x JST-SH 4pin port for Receiver & Analog Camera
o 1x JST-SH 3pin port for LED
USB Type -C
Dimensions: 35x35mm
Mounting Holes: Standard 30.5 x 30.5 mm
Weight: 8g
Firmware Targets
Betaflight Target: KAKUTEF7MINIV3
INAV Target: KAKUTEF7MINIV3
ESC
Tekko32 F4 4in1 50A ESC(AM32)
Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / AM32 / 30x30
Features:
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Tekko32 F4 4in1 60A ESC(AM32)
Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30
Features:
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Tekko32 F4 Metal 4in1 65A ESC(AM32)
F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / AM32
Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.
Features:
New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Metal-cased MOSFET for excellent heat dissipation
Massive on-board capacitance for noise filtering at 2068uf
3 oz copper PCB design to allow bigger current and better heat dissipation
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
SKU20263, 20264,20265 Package Includes:
1x Kakute F722
1x Tekko32 F4 4in1 50A ESC/Tekko32 F4 4in1 60A ESC/Tekko32 F4 Metal 4in1 65A ESC
1x Electrolytic capacito: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
1x JST SH 6pin 100mm cable(for Caddx HD Systems)