Hobbywing Motor QuicRun 2435SL 6500kV G3 1/18
248,75 SEK
- Säkra kortbetalningar
- Fri frakt på ordrar över 2500kr
Beskrivning
Art.nr: HW30404005
QuickRun 2435SL G3 6500KV Brushless Sensorless 1/18-1/16 Motor
Stronger power - Upgraded to 4-pole rotor
The G3 motor adopts a four-pole rotor design with stronger torque and stronger explosive power.
Better performance
Compared with the same specification of products under the same load conditions, the maximum output power is 60% higher, the maximum efficiency is 5% higher, and the temperature is reduced by approximately 30 degrees.
Upgraded materials, durable
0.2mm thick silicon steel, high-strength explosion-proof rotor, 200°C high-temperature-resistant enameled wire, and first-line brand high-precision and high-quality bearings make the motor durable.
Excellent protection
The output of the motor is sealed with a silicone rubber on the housing. It is dust-proof for off-road vehicles/trucks. Users will now enjoy bashing without having to worry in harsh operating environments such as outdoor sand, stones, and dust.
Note: It is recommended to block the unused mounting holes of the motor front cover with screws.
Motor Specs:
Type: 1/18-1/16, Brushless, Sensorless Motor
Poles: 4
KV Rating: 6500
LiPo Cells: 2S
No-load Current: 3.4A
O.D.: 24mm
Length: 36mm
Shaft Diameter: 2mm
Connectors: 3.5mm (male)
Weight: 61.2g
Front Bearing: OD8xID3xT4mm
Rear Bearing: OD8xID3xT4mm
Applications: 1/16-1/18 On-road & Off-road
Ursprungsland: CN
Stronger power - Upgraded to 4-pole rotor
The G3 motor adopts a four-pole rotor design with stronger torque and stronger explosive power.
Better performance
Compared with the same specification of products under the same load conditions, the maximum output power is 60% higher, the maximum efficiency is 5% higher, and the temperature is reduced by approximately 30 degrees.
Upgraded materials, durable
0.2mm thick silicon steel, high-strength explosion-proof rotor, 200°C high-temperature-resistant enameled wire, and first-line brand high-precision and high-quality bearings make the motor durable.
Excellent protection
The output of the motor is sealed with a silicone rubber on the housing. It is dust-proof for off-road vehicles/trucks. Users will now enjoy bashing without having to worry in harsh operating environments such as outdoor sand, stones, and dust.
Note: It is recommended to block the unused mounting holes of the motor front cover with screws.
Motor Specs:
Type: 1/18-1/16, Brushless, Sensorless Motor
Poles: 4
KV Rating: 6500
LiPo Cells: 2S
No-load Current: 3.4A
O.D.: 24mm
Length: 36mm
Shaft Diameter: 2mm
Connectors: 3.5mm (male)
Weight: 61.2g
Front Bearing: OD8xID3xT4mm
Rear Bearing: OD8xID3xT4mm
Applications: 1/16-1/18 On-road & Off-road
Ursprungsland: CN