The specific conditions of the transmitter (and also receiver) operation call for a dedicated type of LiPo batteries there is no need for high discharge rate but low self-discharge and tolerance to irregular charging cycles and long term storage in fully charged state are essential. We are happy to introduce a special line of 5/10C, resp. 15/30C ManiaX LiPo batteries optimized for transmitter or receiver use.
Do not use a charge rate higher than 2C, the recommended charge rate is 1C. We recommend using a balancer during every charge. ManiaX transmitter LiPo batteries do not require any initial forming; however, the initial three charging cycles should be performed at a rate not higher than 0.5C. There is no need to discharge the LiPo batteries before the charging - you can charge partly discharged packs.
The batteries are supplied as a pack tailored to the Vbar Control transmitters. The packs feature output (charging) cables with the JST-XH connector.
The package contents: ManiaX battery pack, instruction manual.
Capacity [mAh]: 2500
Voltage [V]: 7.4
Charging current [A]: 1.2 - 2.5
Max. charging current [A]: 5
Discharging current [A]: 12.5
Max. discharging current [A]: 25
Energy [Wh]: 18.5
Length [mm]: 95
Width [mm]: 30
Height [mm]: 16
Weight [g]: 105