• Säkra kortbetalningar
  • Fri frakt på ordrar över 2500kr
0
Varukorg
Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver
Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver
Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver - 2
Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver - 3

Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver

4 439 SEK
Läs mer...
  • Säkra kortbetalningar
  • Fri frakt på ordrar över 2500kr

Beskrivning

Art.nr: SPMAR10410T

Product Details

In The Box
• (1) AR10410T 10-Channel PowerSafe Receiver
• (1) SPM4651T SRXL2 Remote Serial Telemetry Receiver
• (2) SPM9747 SRXL2 DSMX Remote Receivers
• (1) 9" SRXL2 Remote Receiver Extension
• (1) 12" SRXL2 Remote Receiver Extension
• (1) 24" SRXL2 Remote Receiver Extension
• (2) Battery IC3 Connectors
• (2) Charge Receptacles
• (1) Aircraft Telemetry Volt Sensor
• (1) Soft Switch
• (1) Instruction Manual

Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver Overview
The AR10410T is a 10-channel receiver with full-range telemetry that uses the Spektrum™ PowerSafe™ redundant battery system. It features connections for full telemetry support including RPM, Flight Pack Voltage and Temperature, and X-Bus. The receiver also has a built-in vario/altitude sensor and mAh sensors that allow tracking of consumed mAh. It can be powered through the servo bus or dual IC3™ connections. It is compatible with the Spektrum Synapse™ AS3X+ / SAFE (SPMAS6000) stabilization module, delivering instantaneous attitude corrections and enhancing flight stability.

Using an optional micro-SD card, the AR10410T can store flight data for later review as a CSV file. It also has a new, push-button PowerSafe LED soft switch or can be powered on and off through the on-board button. Additionally, the system can be put in sleep mode from a compatible Spektrum transmitter and woken up between flights and can be powered off from your compatible Spektrum transmitter as well. Bind can be initiated through the button or a bind plug. The AR10410T can be updated easily through the USB-C connection.

Spektrum AR10410T 10-Channel PowerSafe Telemetry Receiver Features
• Compatible with the Synapse™ AS3X+/SAFE Flight Stabilization Module (SPMAS6000, not included)
• Patented PowerSafe™ redundancy system with dual IC3 connectors. Perfect for power hungry aircraft and high current servo applications drawing up to 35A (50A max burst)
• Forward programming allows for easy adjustments to failsafe settings, servo frame rate settings and more
• Innovative power management system designed with sleep mode allowing pilots to remotely power on/off from the transmitter
• Regenerative servo support for any number of servos
• USB-C port for easy product registration and firmware updates
• 12V capable for use with 12-volt servo applications (must be activated via Forward Programming)
• Integrated battery capacity monitor automatically reports the battery capacity used during flight and can reset automatically when fully charged batteries are installed
• Integrated Black Box telemetry log saves all telemetry data automatically when a Micro SD card is installed (Micro SD card not included)
• Integrated status LED provides helpful information during start up, warnings and mode indicators
• Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need of modules, links and wires
• Receiver pack energy & voltage sensor and flight log telemetry data available without the need for additional sensors
• Full range telemetry with integrated barometer to provide altitude and vario telemetry without additional modules
• Included Soft Switch allows servo current to be routed around the switch, so if the switch fails for any reason, power to the system will not be interrupted
• Rubber grommet hard mounts and minimalistic labeling helps produce the cleanest model setups
• Capable of high-speed 11ms frame rates
• Binding is easier than ever with four options to initiate the bind process
• Integrated telemetry with built-in ports for RPM, flight pack voltage, temperature sensors and X-bus for telemetry sensor expansion

Product Specifications:
Application: Air
Band: 2.4GHz
Bind Method: Bind Button, Bind Plug
Channels: 10
Data Port: Yes
Failsafe: Yes
Flight Log Compatible: Yes
Input Voltage: 3.5-12.6V
Modulation: DSMX/DSM2
Product Height: 0.71" (18 mm)
Product Length: 2.6" (66 mm)
Product Weight: 1.9oz (54g)
Product Width: 2.4" (61 mm)
Programmable: Yes
Range: Full
Remote Receiver Ports: 4
Resolution: 2048
Serial Out: SRXL2
Technology: AS3X+
Telemetry: Yes
Tillbaka till toppen