TAMIYA 1/10 R/C Porsche 911 Carrera RSR 2.8 (BT-01)
2 799 SEK
- Säkra kortbetalningar
- Fri frakt på ordrar över 2500kr
Beskrivning
Art.nr: 545593
1/10 R/C Porsche 911 Carrera RSR 2.8 (BT-01)
The 2WD BT-01 chassis which offers choices of FF/MR/FR drive system welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8.
The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires.
The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories.
About the Model
This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm. Wheelbase: 251mm. (Short)
The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate.
Silver color wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547). Please note that the kit does not have the inner sponges for either front or rear.
Separate molded plastic part recreates the side mirror.
Included Tamiya 540 Type motor and Tamiya/Hobbywing ESC.
Separately Required Items
2-channel R/C system, with 1 servo.
Batteries for transmitter.
7,2 Volt Battery Pack & Charger.
Tamiya Spray for Polycarbonate - PS Type.
New BT-01 Chassis
The 2WD BT-01 chassis gives a choice of two types of wheelbase (*), and front- or rear- wheel drive system.
Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.(Six setups are available in total.)
The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Many Hop-Up Option parts for TT-chassis cars can be used to fine-tune setup.
Please note, this version is without Radio, we recommend the RC set from Mstyle.
The 2WD BT-01 chassis which offers choices of FF/MR/FR drive system welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8.
The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires.
The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories.
About the Model
This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm. Wheelbase: 251mm. (Short)
The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate.
Silver color wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547). Please note that the kit does not have the inner sponges for either front or rear.
Separate molded plastic part recreates the side mirror.
Included Tamiya 540 Type motor and Tamiya/Hobbywing ESC.
Separately Required Items
2-channel R/C system, with 1 servo.
Batteries for transmitter.
7,2 Volt Battery Pack & Charger.
Tamiya Spray for Polycarbonate - PS Type.
New BT-01 Chassis
The 2WD BT-01 chassis gives a choice of two types of wheelbase (*), and front- or rear- wheel drive system.
Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.(Six setups are available in total.)
The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Many Hop-Up Option parts for TT-chassis cars can be used to fine-tune setup.
Please note, this version is without Radio, we recommend the RC set from Mstyle.