Pilot RC Pitts S2B Yellow Bulldog 2,2m 87tum
20 387,50 SEK
- Säkra kortbetalningar
- Fri frakt på ordrar över 2500kr
Beskrivning
Art.nr: 4ST2387P03
Bring on the fun, with what is probably the best looking biplane out there. Fear not about long setup times of traditional biplanes, Pilot-RCs innovative and patented systems allow you to have the model completely put together in under 5 minutes, to then unleash the acrobatic and 3D monster that is our Pitts.
SPECIFICATIONS:
Model: Pitts S2B
Wingspan: 87″ (2,200mm)
Length: 84″ (2,120mm)
Wing area: 2,265 ² (1,465 cm²)
Weight: 30.14lbs (13.7kg)
FEATURES:
NEW! Pilot-RC new and patented quick release system for fast wing mounting at the field.
NEW! Pilot-RC new quick release system for wing tension wires.
Special Pilot-RC no screw canopy. Quick release with new security latch design.
Strong but light, specially developed for precision acrobatic and extreme 3D flying
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling so no external screws exposed
Removable wings , wing stuts and stabs.
Laser engraved motor mounting position
INCLUDED HARDWARE:
Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner, 4.5″
REQUIRED HARDWARE
Motor: 100-120cc
Servos: 7-8 high torque plus throttle // Uses x1 per aileron (total x4), x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories
RECOMMENDED ACCESSORIES
Pilot-RC wing bags. Optional extra, not included in the kit.
PILOT-RC RECCOMENDED HARDWARE
Servos:Pilot-Rc PW28AH (28Kg 0,056s at 8,4v)
Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)
SPECIFICATIONS:
Model: Pitts S2B
Wingspan: 87″ (2,200mm)
Length: 84″ (2,120mm)
Wing area: 2,265 ² (1,465 cm²)
Weight: 30.14lbs (13.7kg)
FEATURES:
NEW! Pilot-RC new and patented quick release system for fast wing mounting at the field.
NEW! Pilot-RC new quick release system for wing tension wires.
Special Pilot-RC no screw canopy. Quick release with new security latch design.
Strong but light, specially developed for precision acrobatic and extreme 3D flying
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling so no external screws exposed
Removable wings , wing stuts and stabs.
Laser engraved motor mounting position
INCLUDED HARDWARE:
Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner, 4.5″
REQUIRED HARDWARE
Motor: 100-120cc
Servos: 7-8 high torque plus throttle // Uses x1 per aileron (total x4), x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories
RECOMMENDED ACCESSORIES
Pilot-RC wing bags. Optional extra, not included in the kit.
PILOT-RC RECCOMENDED HARDWARE
Servos:Pilot-Rc PW28AH (28Kg 0,056s at 8,4v)
Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)