CHASERVO Matrix 2.8m 110inch incl. Servos
117 695 SEK
- Säkra kortbetalningar
- Fri frakt på ordrar över 2500kr
Beskrivning
Art.nr: Matrix110
After the success of the Predator Jet, Pilot-RC sets a new standard in the sport and 3D jet segment with the Matrix.
The Matrix was developed from the ground up as a high-performance sport jet with 3D capability. Based on intensive aerodynamic testing and experiences with the Predator, an aircraft was created that combines the highest precision, agility, and stability. Through close collaboration with one of the world's leading jet pilots, the flight behavior was optimized down to the finest detail.
The result:
Direct control feel and precise feedback in all flight attitudes
Outstanding roll rates and neutral knife-edge characteristics
Optimized flow characteristics for clean aerobatic figures
Maximum 3D performance, including extreme slow flight and post-stall maneuvers
Balanced airframe that excels in both precise F3S aerobatics and uncompromising 3D flying
Designed by Mirco Pecorari (Aircraftstudiodesign), the Matrix combines technical efficiency with a dynamic design language reminiscent of super sports cars. Every contour is aerodynamically thought out for minimal drag, maximum control, and a distinctive appearance.
The Pilot-RC Matrix is therefore not just a sport jet it is a tool for the highest demands, made for pilots who want to experience precision and dynamics in a new dimension.
Pilot-RC Matrix 2.8m Features & Specs
Main Features
Extremely lightweight full composite construction, specially designed for sport flying & uncompromising 3D performance
Painted outside the mold → no visible seam lines
Ultralight landing gear specifically developed for the 2.8m version
Quick turbine access for easy installation & maintenance
Tool-free field setup thanks to quick-release wing attachments
Horizontal stabilizer with single clamp from above (assembly/disassembly in seconds)
Flaps usable as additional ailerons → extremely axial roll rate, with counterweights at the aileron tips, only 1 servo required per aileron
Detachable wings, horizontal stabilizer & vertical stabilizer for easy transport
Two-part fuselage design → only 4 screws, easy to transport
o Front fuselage: 1927 mm
o Rear fuselage: 875 mm
o Thrust tube permanently installed in the rear section
Equipment board for clean electronics installation, cables mostly concealed
Pre-installed cable channels for control surface servos
Optional: Vector thrust tube for 3D flight
Delivery contents (including hardware)
Pilot-RC electric retractable landing gear with brakes
4in1 connector/leads for wing & fuselage
3in1 connector/leads for two-part fuselage
2in1 connector/leads for vector version (optional)
Complete cell (including carbon wing plugs & pre-assembled, painted fiberglass control horns)
Vector Thrust Tube
5,500 ml fuel bag
1,800 ml smoke oil bag (optional)
Servos 10x HV3609 already installed.
Wing Bags and Fuselage Bag
Wingspan: 2550mm
Length: 2802mm
Flying weight: 15,9kg without Vector
Manufacturer: Pilot-RC
Number of required servos: 10
The Matrix was developed from the ground up as a high-performance sport jet with 3D capability. Based on intensive aerodynamic testing and experiences with the Predator, an aircraft was created that combines the highest precision, agility, and stability. Through close collaboration with one of the world's leading jet pilots, the flight behavior was optimized down to the finest detail.
The result:
Direct control feel and precise feedback in all flight attitudes
Outstanding roll rates and neutral knife-edge characteristics
Optimized flow characteristics for clean aerobatic figures
Maximum 3D performance, including extreme slow flight and post-stall maneuvers
Balanced airframe that excels in both precise F3S aerobatics and uncompromising 3D flying
Designed by Mirco Pecorari (Aircraftstudiodesign), the Matrix combines technical efficiency with a dynamic design language reminiscent of super sports cars. Every contour is aerodynamically thought out for minimal drag, maximum control, and a distinctive appearance.
The Pilot-RC Matrix is therefore not just a sport jet it is a tool for the highest demands, made for pilots who want to experience precision and dynamics in a new dimension.
Pilot-RC Matrix 2.8m Features & Specs
Main Features
Extremely lightweight full composite construction, specially designed for sport flying & uncompromising 3D performance
Painted outside the mold → no visible seam lines
Ultralight landing gear specifically developed for the 2.8m version
Quick turbine access for easy installation & maintenance
Tool-free field setup thanks to quick-release wing attachments
Horizontal stabilizer with single clamp from above (assembly/disassembly in seconds)
Flaps usable as additional ailerons → extremely axial roll rate, with counterweights at the aileron tips, only 1 servo required per aileron
Detachable wings, horizontal stabilizer & vertical stabilizer for easy transport
Two-part fuselage design → only 4 screws, easy to transport
o Front fuselage: 1927 mm
o Rear fuselage: 875 mm
o Thrust tube permanently installed in the rear section
Equipment board for clean electronics installation, cables mostly concealed
Pre-installed cable channels for control surface servos
Optional: Vector thrust tube for 3D flight
Delivery contents (including hardware)
Pilot-RC electric retractable landing gear with brakes
4in1 connector/leads for wing & fuselage
3in1 connector/leads for two-part fuselage
2in1 connector/leads for vector version (optional)
Complete cell (including carbon wing plugs & pre-assembled, painted fiberglass control horns)
Vector Thrust Tube
5,500 ml fuel bag
1,800 ml smoke oil bag (optional)
Servos 10x HV3609 already installed.
Wing Bags and Fuselage Bag
Wingspan: 2550mm
Length: 2802mm
Flying weight: 15,9kg without Vector
Manufacturer: Pilot-RC
Number of required servos: 10